Home>Products>AMI Bearing>AMI UETFT205-16 Flange Block Bearings
AMI UETFT205-16 MODELS
Need a CAD or 3D Model?
AMI UETFT205-16 Flange Block Bearings
category
AMI Bearing
AMI UETFT205-16 SPECIFICATIONS
With over 10170 full-service 1.00 mm Fillet Radius rb stores, our AMI UETFT205-16 Flange Block Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps BEARING OF AMERICA CORP. you maximize your productivity by saving 2200 rpm Oil Speed Rating n2 time and your hard-earned dollars.
- AMI
UETFT205-16
- 30.0 LB
- Flange Mount
- Right Hand (CW)
- V2010-1F7S2S-1DD12
- 1 1/2
- Flange
- 3/16 in
- N/A
- BEARING OF AMERICA CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
AMI UETFT205-16 Flange Block Bearings Details
- 0.875 in
- Straight w/ Key
- V2010
- 2.3125 in
- Buna-N
- 3000
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 3000
- 3000
- N/A
- 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- V2010-1F7S2S-1DD12
- 2500
- 2500
- 3
- 10.5
- N/A
- Outlet 135° CW from Inlet
- Outlet 90° CW from Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 0.4
- 1.39
AMI UETFT205-16 AMI UETFT205-16 Flange Block Bearings Technology
@@@@@@@@ | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | B | T | d | F | S | C | N | L |
ARN2052 | NTN | - | 46,000 mm | 20,000 mm | - | - | - | - | - |
ARN2052T2 | NTN | - | 46 mm | 20 mm | 25 mm | - | 16 mm | - | - |
ALF205 | KOYO | - | - | 25 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
ALF205-14 | KOYO | - | - | 22,225 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
ALF205-15 | KOYO | - | - | 23,8125 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
ALF205-16 | KOYO | - | - | 25,4 mm | - | 7,5 mm | 14 kN | 10 mm | 64 mm |
YSPAG 205 | SKF | - | - | 25 mm | - | - | 15 mm | - | - |
YSPAG 205-100 | SKF | - | - | 25.4 mm | - | - | 15 mm | - | - |
AXN2052 | NTN | - | 40 mm | 20 mm | 25 mm | - | 16 mm | - | - |
20205 | ISO | 15 mm | - | 25 mm | - | - | 15 mm | - | - |
20205 C | Loyal | 15 mm | - | 25 mm | - | - | 24 kN | - | - |
AMI UCP208-25C Pillow Block Bearings | Max. RPM [Max:30.0 LB; Spline Description:Flange Mount; Model No.:Right Hand (CW); Weight:V2010-1F7S2S-1DD12; Major Diameter [Max:1 1/2; Controlled Flow Rate:Flange; Port Size:3/16 in; Shaft Key:N/A; Pump Series:0.875 in; Shaft Dia.:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UKX07+HS2307 Insert Bearings Spherical OD | Mounting:30.0 LB; Major Diameter [Min:Flange Mount; Shaft Dia.:Right Hand (CW); Spline Description:V2010-1F7S2S-1DD12; Minor Diameter [Min:1 1/2; Pilot Type:Flange; Cover End RPM [Max:3/16 in; Minor Diameter:N/A; Weight:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UCTBL205-16CEW Mounted Units & Inserts | Major Diameter [Min:30.0 LB; Shaft Type:Flange Mount; Seal Material:Right Hand (CW); Spline Description:V2010-1F7S2S-1DD12; Minor Diameter:1 1/2; Mounting:Flange; Cover End Flow @ RPM:3/16 in; Rotation:N/A; Shaft Dia.:0.875 in; Minor Diameter [Min:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI K000 Insert Bearings Spherical OD | Weight:30.0 LB; Model No.:Flange Mount; Major Diameter [Max:Right Hand (CW); Mounting Flange:V2010-1F7S2S-1DD12; Seal Material:1 1/2; Shaft End RPM [Max:Flange; Max. RPM [Max:3/16 in; Major Diameter [Min:N/A; Pump Series:0.875 in; Shaft Dia.:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UCP213CE Pillow Block Bearings | Model No.:30.0 LB; Cover End RPM [Max:Flange Mount; Shaft Type:Right Hand (CW); Shaft Seal Type:V2010-1F7S2S-1DD12; Shaft Dia.:1 1/2; Port Type:Flange; Spline Description:3/16 in; Major Diameter [Max:N/A; Pump Series:0.875 in; Minor Diameter [Min:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI 207CCB Mounted Units & Inserts | Shaft Dia.:30.0 LB; Mounting:Flange Mount; Spline Description:Right Hand (CW); Cover End RPM [Max:V2010-1F7S2S-1DD12; Weight:1 1/2; Shaft Seal Type:Flange; Mounting Flange:3/16 in; Shaft End RPM [Max:N/A; Model No.:0.875 in; Port Size:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI BLLP7-21 Pillow Block Bearings | Minor Diameter:30.0 LB; Mounting Flange:Flange Mount; Max. RPM [Max:Right Hand (CW); Port Size:V2010-1F7S2S-1DD12; Minor Diameter [Max:1 1/2; Shaft Seal Type:Flange; Shaft Dia.:3/16 in; Shaft Length:N/A; Major Diameter [Max:0.875 in; Rotation:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UCF201C Flange Block Bearings | Mounting Flange:30.0 LB; Spline Description:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft Length:V2010-1F7S2S-1DD12; Port Type:1 1/2; Shaft Type:Flange; Major Diameter [Min:3/16 in; Minor Diameter [Min:N/A; Minor Diameter:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UCEP209-27 Pillow Block Bearings | Cover End RPM [Max:30.0 LB; Minor Diameter [Min:Flange Mount; Shaft Seal Type:Right Hand (CW); Model No.:V2010-1F7S2S-1DD12; Max. RPM [Max:1 1/2; Cover End Flow @ RPM:Flange; Weight:3/16 in; Shaft Dia.:N/A; Rotation:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UCFCS214-43 Flange Block Bearings | Rotation:30.0 LB; Minor Diameter [Max:Flange Mount; Minor Diameter:Right Hand (CW); Mounting Flange:V2010-1F7S2S-1DD12; Pilot Type:1 1/2; Cover End Flow @ RPM:Flange; Controlled Flow Rate:3/16 in; Mounting:N/A; Pump Series:0.875 in; Port Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI MUCNFL207-20B Flange Block Bearings | Minor Diameter [Max:30.0 LB; Port Type:Flange Mount; Shaft Seal Type:Right Hand (CW); Rotation:V2010-1F7S2S-1DD12; Controlled Flow Rate:1 1/2; Max. RPM [Max:Flange; Shaft Dia.:3/16 in; Minor Diameter [Min:N/A; Spline Description:0.875 in; Minor Diameter:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI SUE206-18 Insert Bearings Cylindrical OD | Shaft Key:30.0 LB; Mounting Flange:Flange Mount; Port Size:Right Hand (CW); Shaft Dia.:V2010-1F7S2S-1DD12; Major Diameter [Min:1 1/2; Max. RPM [Max:Flange; Seal Material:3/16 in; Cover End RPM [Max:N/A; Cover End Flow @ RPM:0.875 in; Shaft Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UENTPL205-16W Take Up Unit Bearings | Minor Diameter:30.0 LB; Shaft Length:Flange Mount; Rotation:Right Hand (CW); Major Diameter [Min:V2010-1F7S2S-1DD12; Seal Material:1 1/2; Pump Series:Flange; Max. RPM [Max:3/16 in; Pilot Type:N/A; Minor Diameter [Max:0.875 in; Shaft Key:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI UCFT204NP Flange Block Bearings | Shaft Dia.:30.0 LB; Mounting:Flange Mount; Rotation:Right Hand (CW); Spline Description:V2010-1F7S2S-1DD12; Shaft End RPM [Max:1 1/2; Pump Series:Flange; Major Diameter [Max:3/16 in; Minor Diameter:N/A; Shaft Length:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S2S-1DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):1.39; |
AMI Mounted Bearing Unit Full Catalog - Accent Bearings
AMI Bearings, Inc. 5 description series #. Locking style dimensional unit of Measurement. Housing Material Page. HeaVY dutY units. Four-Bolt Flange Units
Distributor & Supplier of AMI Bearings Parts - Illinois
Accent Bearings is an authorized distributor & supplier of AMI Bearings parts products & components. To inquire more about our product line or have questions
AMI Bearings - Motion Industries
AMI Bearings. AMI has over 50,000 unique mounted ball bearing unit combinations to meet your application demands. Narrow Your Search. Go
Mounted Ball Bearings- AMI Bearings, Inc.- Mount Prospect
AMI Bearings, Inc. is a World Class Manufacturer of Mounted Ball Bearings Serving the North American Market. Featuring the broadest possible combination of over 50,000 unique mounted ball bearings to meet your application demands
AMI Bearings - UELFL204 - Motion Industries
AMI Bearings UELFL204. Flange-Mount Ball Bearing Unit - Two-Bolt Flange, 20 mm Bore, Cast Iron Housing, Standard Duty, Accu-Loc Locking, Contact with
AMI Bearings, Inc. | LinkedIn
AMI Bearings, Inc. is a World Class Manufacturer of Mounted Ball Bearings Serving the North American Market Featuring the broadest possible combination of
AMI UETFT205-16 Flange Block Bearings Video
Contact Us
- BEARING OF AMERICA CORP.
- Address5030 Corporate Way Richmond, Kentucky 40475, U.S.A.
- Phone(Working Time)626-5698
AMI UETFT205-16 Technical Articles
90x190x46.5 bearing dimensions tolerances |
6.35x15.875x4.978 bearing dimensions |
600x980x375 bearing table |
AMI Bearing CATEGORIES
- DAIKIN VZ63 Series Piston Pump
- DAIKIN VZ80 Series Piston Pump
- TOKYO KEIKI Double Vane Pump
- TOKYO KEIKI P Series Piston Pump
- TOKYO KEIKI P*V Series Piston Pump
- TOKYO KEIKI Single Vane Pump
- TOKYO KEIKI SQP Series Triple Vane Pump
- TOKYO KEIKI Vane Pump
- FAG Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- AMI Bearing
- BOSTON GEAR BEARING
- BROWNING BEARING
- CONSOLIDATED BEARING
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Pressure reducing valve
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Directional poppet valves
- REXROTH Throttle valves
- REXROTH Directional spool valves
- REXROTH Check valves
- 6203du Bearing
- tmst 3 Bearing
- 698z Bearing
- 608 bearing skf Bearing
- Eaton Vickers ydraulic Pump
- For Komatsu
- For Rexroth
- Gear Pump
- Hydraulic Motor
- Kawasaki ydraulic Pump
- Parker Denison ydraulic Pump
- Piston Pump
- Replacement for CAT
- Sauer ydraulic Pump
- Vane Pump
- Water Pump
- Yuken Hydraulic Pump
- Original Hydraulic Pump